HOSOKAWA ALPINE Aktiengesellschaft | Chemicals Division

Booth number 2.1D57

www.hosokawa-alpine.com

About us

HOSOKAWA ALPINE is one of the leading international manufacturers in blown film technology and powder process technology for almost all industrial sectors. Development, testing, engineering, production and commissioning - everything from one source.

Chemicals Division

Comprehensive process-technologies solutions for the chemical industry as a single-source partner. Machines and systems for processing chemical base substances, fine-grade chemicals and speciality products. Innovative solutions for toner, dyes, pigments, wax, resin, adhesives, herbicides and fertilisers. The range of services of the chemicals division is yet to be matched. The comprehensive know-how includes the engineering of complete systems.

Products and services

Chemicals Division

Comprehensive process-technologies solutions for the chemical industry as a single-source partner. Machines and systems for processing chemical base substances, fine-grade chemicals and speciality products. Innovative solutions for toner, dyes, pigments, wax, resin, adhesives, herbicides and fertilisers. The range of services of the chemicals division is yet to be matched. The comprehensive know-how includes the engineering of complete systems.

Technologies of Additive Manufacturing

Exploit the full potential of additive manufacturing.
Enjoy even greater efficiency and flexibility through modern technologies from HOSOKAWA ALPINE. For grinding and classifying of polymers as well as classifying of metal powders are characterised by a dual benefit: easy cleaning of the systems, even with highly frequent changes of product and very high production reliability with infinitely adjustable cuts.

Further reading

Powder coatings technology

The market for powder coatings is still growing fast. Besides a capacity increase brought about by new powder coating applications, the requirements for quality, system efficiency and reliability are also increasing. HOSOKAWA ALPINE addressed the special requirements of the powder coating industry and has made enormous efforts over the last few years to offer its customers attractive solutions.

Further reading

E3 Beaters – Increase Capacity, Reduce Energy Consumption

HOSOKAWA ALPINE launches new ACM beaters on the market.
Up to 20 percent higher throughput, lower temperature intake, less complicated retrofitting – the new ACM beaters with the distinctive name "E3 Beaters" increase capacity and reduce energy consumption. HOSOKAWA ALPINE, a leading technology provider in the field of process technology, has succeeded with the E3 beaters in bringing a new top performer for the ACM classifier mill onto the market.

Further reading

Address
HOSOKAWA ALPINE Aktiengesellschaft | Chemicals Division
Peter-Doerfler-Str. 13 – 25
86199 Augsburg
Germany

Phone: +49 821 5906-0
Internet: www.hosokawa-alpine.com
E-mail: Send message

Contact person

Dmitry Volchensky
Project Manager
Phone: +7 812 3631642
E-mail: Send message

Representative
HOSOKAWA MICRON Sankt Petersburg OOO
7th Line V.O. 76, letter A, office 619
199178, St. Petersburg
Russia

Phone: +7 812 363 16 42
Internet: www.hosokawa.ru
E-mail: Send message

News & Innovations

E³ Beaters – Increase Capacity, Reduce Energy Consumption

HOSOKAWA ALPINE launches new ACM beaters on the market.

Up to 20 percent higher throughput, lower temperature intake, less complicated retrofitting – the new ACM beaters with the distinctive name "E3 Beaters" increase capacity and reduce energy consumption.HOSOKAWA ALPINE, a leading technology provider in the field of process technology, has succeeded with the E3 beaters in bringing a new top performer for the ACM classifier mill onto the market.

E3 beaters – efficiency now has a name

E3 stands for economical and energy-efficient grinding. With the new E3 beaters, throughput increases of up to 20 percent compared with existing ACM classifier mill beaters are achieved. As a result of the energy savings, the production costs sink to a minimum. The geometry of the E3 beaters serves to improve the effectiveness of the size reduction process twice over: besides the impact intensity, the impact frequency is also optimised. The inwards-oriented stagnation point flow, which works as a performance obstacle, was minimised. In this way, an optimum energy utilisation of the beaters is achieved. The result: a lower specific energy consumption. The main applications of the E3 beaters are to be found in the grinding of powder coatings and the grinding of tough materials that are difficult to grind such as wax and stearate.

Low production costs, high product quality, uncomplicated retrofitting – all advantages at a glance

The short batch times brought about by the high throughput rate, the low specific energy requirement, the short set-up time due to the wide fineness range of the grinding equipment and the high service life as a result of the speed-dictated low degree of wear all combine to reduce the production costs to a minimum. The E3 beaters also increase the product quality. The fines portion is minimised and even the heat generated during the comminution process and the product contamination brought about by abrasion is reduced.

The investment for retrofitting amortises within one year

The exchange of the old grinding disc for a new one fitted with E3 beaters is simple and guarantees an uncomplicated retrofitting process. No changes to other components are necessary when changing the grinding discs – meaning that the system is fully operational within a very short space of time. Retrofitting can take place on site or by a HOSOKAWA ALPINE expert – dependent on customer requirements. The retrofitting costs of the E3 beaters amortise within one year – an investment which really pays off in the long run.


Further reading
HOSOKAWA ALPINE presents solutions for complex 3D printing

Precise and uniform processing of metal and polymer powders

HOSOKAWA ALPINE, one of the leading providers in the fields of process technology and film extrusion, has presented solutions for 3D printing at the POWTECH 2019. "The demands in the additive manufacturing sector are steadily rising. In order to do justice to this fact, we have improved and refined several HOSOKAWA ALPINE machines. We can thus offer our customers optimum solutions for the size reduction and classification of metal and polymer powders", says Sylvia Bräunlein, Operations Director of the Chemicals Division of HOSOKAWA ALPINE's process technology business segment.

HOSOKAWA ALPINE ultrafine classifier technology for metal powders in 3D printing

In the additive manufacturing of metal powders, a precise but homogeneous particle size distribution plays a decisive role. HOSOKAWA ALPINE has decades of experience in the development of classifying technologies for different branches. The proven ultrafine classifiers ATP and TSP permit flexible cut points in the range 5-150 μm, and dependent on the requirements, also as a classifying system without filter in circuit-gas mode. The refined TTSP classifier is the only machine on the market capable of realising two cut points for metal powders in one single machine. The top cut and dedusting are accomplished thereby in only one process step.

Ultrafine cryogenic grinding of polymer powders

Ultrafine grinding with an exact top cut as well as the dedusting step are the essential requirements when it comes to the 3D printing of polymer powders. "The Contraplex wide-chamber mill has proven itself in practical operation over many years. And we have now adapted the machine to meet the specific demands in 3D printing", explains Bräunlein. The CW II is characterised by the optimised grinding elements and temperature control, as the result of which the liquid nitrogen and energy consumption is reduced. Tumbler screening machines or air classifiers are employed to
achieve the demanded particle size distribution. The latter, for example, dedust particles that are smaller than 10 – 20 μm and attain a top cut between 70 – 100 μm.


Further reading

Click here if you notice an image that violates copyright or privacy rights.

Get in contact
OK

We use cookies and the web analysis tool Matomo in order to optimally design and continuously improve our website for you. By continuing to use our website, you agree to this. Further information and an objection possibility can be found here: Data protection