TEMA Process BV is a specialized company with management and employees that have many years of experience in the design and manufacturing of thermal and physical process equipment, mainly fluid bed dryers / coolers with associated equipment & plants.
TEMA Process B.V. manufactures continuous and batch fluid beds. Batch fluid beds are used when products integrity is required for example in the pharma industry or for small quantities of product. Continuous dryers / coolers can be delivered in static or dynamic (shaking, vibrating) fluid beds. Static fluid bed can be delivered with or without submerged heat exchangers.
Drying – Removal of liquids by evaporation in a fluid bed dryer for thermally treating of powders, fibres, crystals and pelletized or extruded materials.
Cooling – After heating the product during the drying process in most of the cases cooling is required. The fluid bed cooler can be integrated with the
dryer or supplied as a separate unit.
Calcining – Thermal process to remove and evaporate crystalline water.
Shaking fluid bed units for continuous operation and suitable for sticky aterials with a wide particle size distribution. The shaking motion improves the fluidization and transport of any material within the fluid bed. Drying gas temperature up to 750 °C and product temperatures up to 400 °C are achieved. Decontamination plants for treating food products both at high pressure and atmospheric pressure. Products are exposed to a live steam atmosphere for a short and determined period to reduce the bacterial load of the material. After steam treatment the products are dried and cooled in either a fluid bed or a flash dryer
Belt dryers for continuous drying of pellets or agglomerates mainly used for products that are not suitable for fluid bed drying. The materials that are sticky, of which the particle size is too large or the required residence time above 1 hour. These dryers are manufactured with single and multi-stage belts. Housing and belts in mild or stainless steel